Barcelona → Malaga
Today's conditions on this route
- 75 g/kWh
- 66% renewable
- 18°C · normal
- 75 g/kWh
- 66% renewable
- 12°C · normal
Grid: energy-charts · Weather: open-meteo.com
Range by Weather Condition
In normal weather 24 of 24 EV models complete this route. Estimated charging stops among them: 2 to 8 (median 3).
Select a vehicle above to explore weather-adjusted range.
Assumptions behind these numbers
- Model assumptionStart charge 100%, arrive with 15% in reserve, charge up to 80% at each stop.
- Model assumptionUsable battery: 100% of each vehicle's listed capacity (the listed capacity may be gross or net; no correction is applied).
- Model assumptionSpeed: consumption starts from each vehicle's listed real-world efficiency, times a speed factor of 1.00 (1.00 = no speed adjustment).
- Vehicle dataWeather: each vehicle uses its own hot, normal and cold factor from our vehicle data, so consumption = efficiency x 1.00 / factor. Hot is 25 °C and above, normal is 10-25 °C, cold is below 10 °C.
- Model assumptionCharging speed: average power = min(vehicle peak kW, 150 kW cap) x 0.60 taper, plus 5 min per stop.
- MethodRange, energy and cost all use the same consumption figure. Energy is measured at the battery; charging losses are not included.
- MethodCharging stops are estimated from range and the charging window. They are not verified charging stations.
- Market dataCost: not shown, because no electricity market price is available for Spain.
- Market dataCO2: energy x grid average carbon intensity of 75 g/kWh (Spain, energy-charts, as of 16 Nov 2026).
More EV Routes in Spain
See all Spain routes →Route analysis
The Barcelona to Malaga route covers 957 km and requires roughly 648 minutes of driving, a long domestic journey across Spain with no border crossing. For EV drivers, the corridor total suggests refueling options exist across the drive, but the disparity between endpoints means starting from Barcelona offers far more urban charging choice than arriving in Malaga. Both cities have normal climates, so temperature-related range loss is unlikely to be a major planning factor. Drivers should verify connector compatibility and station reliability along the corridor rather than assume the raw count guarantees availability at any single point.